Total Pageviews

Tuesday, November 30, 2010

Another shot of passanger side body mount No.3



Under side of body mount No.2 on drivers side

Here it the rust has now been cut out.

Another bit of rust to be dealt with!

Here now all the rust has been cut out

No.4 body mount holes in the body were torn to pieces,so I just cut out the damaged fiberglass,it will be repaired at a later date.

Inside the passanger rear wheel arch had a hole from possiably something that got cought with the wheel so I cut that out also.

This was when I was about to put the body onto the dolly to size it up.







The seat bolt braces were compleatly rotten through and will be removed.

Here I decided to give the the pillar a bit of a clean up to inspect it a bit better
Posted by at No comments:
Subscribe to: Posts (Atom)

Follow along as I attempt a restoration on my Stingray.

I origionally bought this car to have for weekend driving and so on, I had in mind to tidy up the overall basic apperance starting with the interior then wheels etc; but once I started to remove certan parts I soon realised that this is going to need a little more than a tidy up,

Of course this being a blog page the most recent work I have done will be displayed first.
(a bit like reading a book from back to front really)

To the right there ia a Restoration Archive so you can select older posts from start to finish.

Follow along as I attempt a restoration on my Stingray.